Reza Ghahremaninejad Mianji (Supervised by Prof.Dr. Semih Bilgen) “Distributed and Collaborative Decision-Making Mechanism for Connected and Automated Vehicles” Istanbul Okan University, Mechatronics Engineering Ph.D. Programme, November 2024.
Hayder Osamah Dawood Al,Khalidi (Supervised by Prof.Dr. Semih Bilgen) “Drowsiness Detection Using Brain Signal Recognition Deep Neural Network” Istanbul Okan University, Mechatronics Engineering Ph.D. Programme, October 2024.
Mustafa Karamuk (Supervised by Prof. Dr. Orhan Alankuş) “Tilting Control Systems for 3-Wheeler City Vehicle” Istanbul Okan University, Mechatronics Engineering Ph.D. Programme, March 2023.
Murat Gözü (Supervised by Dr. Başar Özkan) “Estimation of the Tire-Road Friction Coefficient and Stability Control of the Vehicle by Steering Right and the Left Tires Independantly” Istanbul Okan University, Mechatronics Engineering Ph.D. Programme, December 2021.
Omar Abdulselam (Supervised by Dr. Başar Özkan) “Using of Fuzzy PID Controller to Improve Vehicle Stability for Planar and Full Vehicle Models.” Istanbul Okan University, Mechatronics Engineering Ph.D. Programme, October 2017.
Ömer Cihan Kıvanc, (Supervised by Dr. Salih Barış Öztürk) “Sensorless Permanent Magnet Synchronous Machine Control Based on Stator Feedforward Voltage Estimation”, Istanbul Okan University, Mechatronics Engineering Ph.D. Programme, 2016.
Yüksek Lisans Tezleri:
Dündar Selim, (2025) (Supervised by Alp S.) Modeling E-Scooter User Preferences Using Machine Learning Methods, Yapay Zeka Mühendisliği Yüksek Lisans Programı, 2025.
Abdelmouanim Bensabeur, (2024) (Supervised by Tuncay R.N.) Predicting Battery State of Health: The Machine Learning Approach, Otomotiv Mekatroniği ve Akıllı Araçlar Yüksek Lisans Programı, 2024.
Buraq Mohammed Saeed, (2024) (Supervised by Kıvanç Ö. C.) Optimal Sizing of a Liion Battery/Supercapacitor Hybrid Energy Storage System for a Forklift Under RealTime Constraints, Güç Elektroniği ve Temiz Enerji Sistemleri Yüksek Lisans Programı. 2024.
Ali Seif El Din, (2023) (Supervied by Bilgen, S.) Safe Overtaking Maneuver Design for Autonomous Vehicles, Otomotiv Mekatroniği ve Akıllı Araçlar Yüksek Lisans Programı, 2023.
Mohammed Jabal Mohammed, (2023).(Supervised by Tuncay R. N.), Design of Permanent Magnet-Assisted Synchronous Reluctance Motor for air-conditioning applications, Güç Elektroniği ve Temiz Enerji Sistemleri Yüksek Lisans Programı. 2023.
Shamsi Shariq Ahmed, (2023). (Supervised by Kıvanç Ö. C.) Smart (V2G) Power Transfer on Scenario Based Strategies Trained Through ANN for Maximum Tarif Saving and Energy Management in MATLAB/SIMULINK, İstanbul Okan Üniversitesi- >Fen Bilimleri Enstitüsü->Elektrik Mühendisliği Ana Bilim Dalı 2023.
Bartu Tuna, (2023). (Supervised by Tuncay R.N.) The Evaluation of Battery Electric Vehicle and Its Impact on Climate Change. İstanbul Okan Üniversitesi->Lisansüstü Eğitim Enstitüsü->Makine Mühendisliği Ana Bilim Dalı,2023.
Dumlu Hani, (2023). (Supervised by Kıvanç Ö. C.) Design and implementation of residual current sensor for electric vehicle charging systems, İstanbul Okan Üniversitesi->Lisansüstü Eğitim Enstitüsü->Makine Mühendisliği Ana Bilim Dalı 39
Sadıkoğlu Semih, (2023). (Supervised by Kıvanç Ö. C.) Permanent Magnet Synchronous Motor Design and Implementation for Steer-by-Wire System, İstanbul Okan Üniversitesi->Lisansüstü Eğitim Enstitüsü->Otomotiv Mekatroniği ve Akıllı Araçlar Ana Bilim Dalı,
Mohamed Abdalla Ahmed Roshdi, (2023). (Supervised by Kıvanç Ö. C.) Development of an quadcopter planning algorithm, İstanbul Okan Üniversitesi->Lisansüstü Eğitim Enstitüsü->Otomotiv Mekatroniği ve Akıllı Araçlar Ana Bilim Dalı.
Yavuz Mete, (2023). (Supervised by Kıvanç Ö. C.) Multi-agent reinforcement learning based energy management with P2P/V2G, İstanbul Okan Üniversitesi->Lisansüstü Eğitim Enstitüsü->Otomotiv Mekatroniği ve Akıllı Araçlar Ana Bilim Dalı.
Shabir Hamza, (2023). (Supervised by Kıvanç Ö. C.) Development of a Torque Vectoring Strategy to IMPROVE Performance in Electric Vehicles, İstanbul Okan Üniversitesi->Lisansüstü Eğitim Enstitüsü->Mekatronik Mühendisliği Ana Bilim Dalı,2023.
Azam Abdul Malik Osamah Mohammed, (2023). (Supervised by Kıvanç Ö. C.) Close Follow Up Truck Platooning using IPG and MATLAB/Simulink, İstanbul Okan Üniversitesi->Lisansüstü Eğitim Enstitüsü->Otomotiv Mekatroniği ve Akıllı Araçlar Ana Bilim Dalı.2023
Jamil İzrahi, (2023) (Supervised by Tuncay R.N),Transion VW Beetle Model 1970 From ICE Vehicle to Electric Vehicle Modeling and Simulation, İstanbul Okan Üniversitesi->Lisansüstü Eğitim Enstitüsü->Otomotiv Mekatroniği ve Akıllı Araçlar Ana Bilim Dalı.2023
Kamoona Mustafa Assim Mohammed, (2022). (Supervised by Kıvanç Ö. C.) Load sharing strategy using intelligent controller of hybrid vehicle with fuel cell, battery and ultra-capacitor energy storage, İstanbul Okan Üniversitesi->Lisansüstü Eğitim Enstitüsü->Elektrik ve Elektronik Mühendisliği Ana Bilim Dalı,2022.
Burak Karsanbaş, (2022), (Supervised by Tuncay R.N.), Analyzing of Differences Working Principles and Total Cost of Between Conventional and Electric Vehicles, 40 İstanbul Okan Üniversitesi->Fen Bilimleri Enstitüsü->Mühendislik Bilimleri Ana Bilim Dalı, 2022.
Gözükırmızı Ali Sami, (2022). (Supervised by Kıvanç Ö. C.) Görsel derin öğrenme yöntemlerine dayalı olarak elektrik motorları üzerindeki yüzey anormalliklerinin tespiti, İstanbul Okan Üniversitesi->Fen Bilimleri Enstitüsü->Mühendislik Bilimleri Ana Bilim Dalı,2022.
Sinan Baydan, (2021), (Supevised by Tuncay R.N.), A Study on the SOH Estimation Methods of Lithium-ion Batteries, İstanbul Okan Üniversitesi->Fen Bilimleri Enstitüsü->Mühendislik Bilimleri Ana Bilim Dalı, 2021.
Kavvasoğlu Cemre, (2019). (Supervised by Kıvanç Ö. C.) Developing de-noising algorithm improved with least mean squares filter for autonomous-vehicles LIDAR in snowfall, İstanbul Okan Üniversitesi->Fen Bilimleri Enstitüsü->Elektrik-Elektronik Mühendisliği Ana Bilim Dalı.2019.
Recepşan Günay, (2018) (Supervised by Tuncay R. N.) “Modeling and Experimental Study of Adaptive Cruise Control System”, Master of Science Thesis, Automotive Mechatronics and Intelligent Transportation MSc. Programme, Institute of Science, Istanbul Okan University, December 2018.
Ali Köse, (2018) (Supervised by Tuncay R. N.) “Modeling and Simulation of Electric Vehicle Power Train”, Master of Science Thesis, Automotive Mechatronics and Intelligent Transportation MSc. Programme, Institute of Science, Istanbul Okan University, March 2018.
Can Özyurtlu, (2017) (supervised by Alankuş O.) “Dynamic Parametric Modeling of Electric Vehicles and Estimation of Mass and Tire Road Friction Coefficient” Master of Science Thesis, Automotive Mechatronics and Intelligent Transportation MSc. Programme, Institute of Science, Istanbul Okan University, October 2017.
Gökhan Bahadır, (2017) (Co-supervised by Ozturk, S.B.), “Investigation of Performances of Model Predictive Controlled Induction Motors,” M.Sc. Thesis, Institute of Science, Istanbul Okan University September 2018 41
Saaed Ur Rahman, (2017) (supervised by Ozturk, S.B.) “A Simple Least Squares Approach for Low Speed Performance Analysis of Indirect FOC Induction Motor Drive Using Low-Resolution Position Sensor,” M.Sc. Thesis, April 2017
Muhammad Ameen Majeed, (2017) (supervised by Ozturk, S.B.), “An Encoder Fault Tolerant FPGA Based Robot Control Using Bluetooth of a Smart Phone,” M.Sc. Thesis, April 2017.
Nikbay, Kader, (2106) (superised by Akgun B. T.) “Otonom Araçların Güzergah Takibi için bir Uygulama”, Fen Bilimleri Enstitüsü, Bilgisayar Mühendisliği Tezli Yüksek Lisans Programı, Istanbul Okan Üniversitesi, 2016.
Zeynel Koc (İTÜ)), “Otonom Otomobil İçin Araç Mekatroniği Uygulaması”. Yüksek Lisans Tezi, İstanbul Teknik Üniversitesi, Mekatronik Programı, 2011.
Şafak Güner (İTÜ), “Otonom bir Otomobil İçin Hız Kontrolörü Tasarımı ve Uygulaması”. Yüksek Lisans Tezi, İstanbul Teknik Üniversitesi, Mekatronik Programı, 2012
